Aquadart Venturi 6 Single Door Offset Quadrant Shower Enclosure

Maximise and revamp the precious space you have by positioning a quadrant enclosure in a corner of your bathroom. The Aquadart Venturi offset quadrant shower boasts beautiful curves that help to smoothly shape an often-harsh angle, bringing a rounded, fluent air to a bathroom or en-suite. 

The offset aspect produces a showering surface that is generously spacious whilst making the most of your floor space. With its single sliding door that smoothly glides to open or close, clear glass and a distinctive, polished silver finish this offset enclosure makes an impressive and stylish addition to any bathroom suite.

Polished silver finish
Clear glass
Concealed fixings
6mm toughened safety glass
Clean & Clear™ glass protection system
Generous adjustment for out of true walls
Reversible for left or right hand installation
Adding an extension wall profile will increase the door width by either 40 or 80mm

Shower door adjustments:
1000 x 800mm - 965-990/765-790mm
1200 x 800mm - 1165-1190/765-790mm
1200 x 900mm - 1165-1190/865-890mm

Please note; image shows quadrant shower enclosure

Shower tray not included. View our entire range of shower trays available.

Shower Enclosure Handing:

Offset Quadrant Shower Enclosures can be reversed for a left or right hand opening. The diagrams below show a top down view of each installation. When ordering please choose the corresponding tray to the installation you desire.

Left Handed

Right Handed

Please note: The above diagrams are for illustration purposes only.

Suitable Installations:

Corner

Please note: The above diagrams are for illustration purposes only.

What is Clean & Clear™?

The Clean & Clear™ glass protection system creates a 'non-stick' surface on your shower enclosure that resists lime scale build-up along with water spots allowing your shower enclosure to maintain in pristine condition for longer. Whilst maintaining the look of your shower enclosure it also helps to protect against bacteria growth making your bathroom more hygienic.

Shower Enclosure Adjustment Ranges:

When viewing the shower door size or side panel size you will find they have an ‘adjustment range’. There is space within the wall profile where you can adjust the frame, either closer or further away from the wall. Usually, adjustment ranges only reduce the size of the enclosure, thus, the largest size of the adjustment range is the actual measurement of the door or side panel. Adjustment ranges can be used if you have an uncommon sized space for your enclosure, if you have uneven walls or you have a tiled enclosure space.

The below diagram shows the adjustment range within a tiled enclosure space.

Please Note;

Adjustment ranges WILL differ between manufactures and enclosure types.

Can we improve the information for this product?
Click here to complete a short form that will help us improve this pageCan we improve the information for this product?
Click here to complete a short form that will help us improve this page