With its semi-frameless form and clear glass, the Aquadart Venturi offers a cutting-edge design solution for a modern and airy bathroom. The quadrant shower enclosure tucks neatly away into the corner of the room to maximise space for a slick and stylish finish.
An offset shower enclosure offers a greater showering area, allowing you plenty of space to store toiletries and get on with your daily wash without feeling cramped and crowded. The silky curves and single sliding door give this enclosure a wonderfully relaxed, fluid feel making it the ideal choice for a tranquil and welcoming bathroom.
Fully Concealed Fixings
Clean & Clear™ Glass Treatment
Colour Matched Soft Close Door Seals
Reversible Door For Left and Right Hand Opening
Adding an extension wall profile will increase the door width by 50mm
Shower door adjustments:
900 x 760mm - 860-885/720-745mm
1000 x 800mm - 960-985/760-785mm
1200 x 800mm - 1160-1185/760-785mm
1200 x 900mm - 1160-1185/860-885mm
Shower tray not included. View our entire range of shower trays available.
Shower Enclosure Handing:
Offset Quadrant Shower Enclosures can be reversed for a left or right hand opening. The diagrams below show a top down view of each installation. When ordering please choose the corresponding tray to the installation you desire.

Left Handed

Right Handed
Please note: The above diagrams are for illustration purposes only.
Suitable Installations:

Corner
Please note: The above diagrams are for illustration purposes only.

What is Clean & Clear™?
The Clean & Clear™ glass protection system creates a 'non-stick' surface on your shower enclosure that resists lime scale build-up along with water spots allowing your shower enclosure to maintain in pristine condition for longer. Whilst maintaining the look of your shower enclosure it also helps to protect against bacteria growth making your bathroom more hygienic.
Shower Enclosure Adjustment Ranges:
When viewing the shower door size or side panel size you will find they have an ‘adjustment range’. There is space within the wall profile where you can adjust the frame, either closer or further away from the wall. Usually, adjustment ranges only reduce the size of the enclosure, thus, the largest size of the adjustment range is the actual measurement of the door or side panel. Adjustment ranges can be used if you have an uncommon sized space for your enclosure, if you have uneven walls or you have a tiled enclosure space.
The below diagram shows the adjustment range within a tiled enclosure space.
Please Note;
Adjustment ranges WILL differ between manufactures and enclosure types.

Finish | Polished Silver |
---|---|
Finish | Polished Silver |
Installation | Corner |
Glass Thickness | 8mm |
Height | 1900mm |
Guarantee | Lifetime |
Brand | Aquadart |
Part Number | 15047 |
Manufacturer Part Numbers |
AQ8123S, AQ8124S, AQ8125S
AQ2095
TR9-1080Q-L, TR9-1080Q-R, TR9-1280Q-L, TR9-1280Q-R, TR9-1290Q-R, TR9-1290Q-L
AQ9-TURBO, AQ9-GW-700, AQ9-GW-999
|

Delivery Zone | Small Delivery | Large Delivery |
---|---|---|
Zone 1 | £6.95 | £39.95 |
Zone 2 | £6.95 | £59.95 |
Zone 3 | £6.95 | £79.95 |
Other | Requires Postcode | Requires Postcode |
Prices shown are the standard delivery charges for each zone, prices may vary depending on your full postcode. Please enter your full postcode at the checkout stage for an accurate delivery cost.