Easyflush Direct is an electronic flushing system for WCs that removes the need for a WC cistern, by taking its water feed straight from the mains supply
Cistermiser Easyflush Direct Wave No Touch Mains WC Flush Valve
Easyflush Direct includes a valve, DC pipe interruptor and sensor.
When the sensor is activated, the valve is activated for between 2 and 3.5 seconds, supplying water to flush the WC direct from the mains water supply. After this period the valve closes and the flush is complete, but can be activated again immediately
Easyflush Direct Wave is operated by the user bringing their hand towards the infrared sensor
A part flush is triggered by holding one’s hand in place near the sensor for about 1 second and a full flush is triggered by a slightly longer hand pass.
If the water flow rate exceeds 150 lpm, splashing from the WC bowl may occur. Easyflush Direct is fitted with a flow regulator that will limit the flow rate to 100 lpm. However, additional flow regulators for 90 lpm and 125 lpm are included, to regulate the flow rate further, if required
No cistern required – saves space
No inlet valves – reduced installation cost
No cistern refill – immediate re-flush for busy areas
Infrared sensor operated
Hygiene flush to maintain cleanliness
Range of flow rates
Compliant with Water Regulations. WRAS approved
BREEAM Wat 01 compatible product