Hudson Reed Black Wet Room Shower Enclosure

Finished in Matt Black
Aluminium wall profile
Generous adjustment for out of true walls
Includes matt black support arm
‘T’ joining section supplied with support arm
8mm British standard toughened safety glass

Optional retrurn panel or swing return panel

Shower tray not included. View our entire range of shower trays

Please note:

Any additional side panel DOES REQUIRE Side Panel Profile Pack
Hudson Reed Wet Room Return Panel 250mm DOES REQUIRE Return Panel Profile Pack
Hudson Reed Black Wet Room Swing Panel 300mm DOES NOT REQUIRE Return Panel Profile Pack

Suitable Installations:

Alcove

Corner

Please note: The above diagrams are for illustration purposes only.

Shower Enclosure Adjustment Ranges:

When viewing the shower door size or side panel size you will find they have an ‘adjustment range’. There is space within the wall profile where you can adjust the frame, either closer or further away from the wall. Usually, adjustment ranges only reduce the size of the enclosure, thus, the largest size of the adjustment range is the actual measurement of the door or side panel. Adjustment ranges can be used if you have an uncommon sized space for your enclosure, if you have uneven walls or you have a tiled enclosure space.

The below diagram shows the adjustment range within a tiled enclosure space.

Please Note;

Adjustment ranges WILL differ between manufactures and enclosure types.