The Lakes Classic Slider Shower Enclosure is the lightest of touches is all that’s needed for the door to glide back, enabling you to step in and enjoy a light and spacious shower.
6mm toughened glass
Can become a 3 sided shower enclosure if you add two side panels
The inline panel can be used to extend the width of your shower door
The high quality extension profiles can be used to bridge gaps in non-standard sized openings
Please add 30mm when choosing an extension profile
Please note: Images shown are of the the silver shower door
Please note: Optional inline panel pack is compromised of a 350mm panel, profile and bracing arm.
Shower tray not included. View our entire range of shower trays
Please note: The above diagrams are for illustration purposes only.
Shower Enclosure Adjustment Ranges:
When viewing the shower door size or side panel size you will find they have an ‘adjustment range’. There is space within the wall profile where you can adjust the frame, either closer or further away from the wall. Usually, adjustment ranges only reduce the size of the enclosure, thus, the largest size of the adjustment range is the actual measurement of the door or side panel. Adjustment ranges can be used if you have an uncommon sized space for your enclosure, if you have uneven walls or you have a tiled enclosure space.
The below diagram shows the adjustment range within a tiled enclosure space.
Adjustment ranges WILL differ between manufactures and enclosure types.
|Manufacturer Part Numbers|
|Delivery Zone||Very Small Delivery||Small Delivery||Large Delivery|
|Other||Requires Postcode||Requires Postcode||Requires Postcode|
Prices shown are the standard delivery charges for each zone, prices may vary depending on your full postcode. Please enter your full postcode at the checkout stage for an accurate delivery cost.