Premier Traditional Dual Exposed Thermostatic Shower Valve

Product Code: PID3881
Premier Premier

Write the first review

Was: £284.00 saving you £161.32 until the offer ends


Estimated Dispatch Time:

Awaiting Stock

Unfortunately this product is out of stock

Product Information

The turn of the century evokes a feeling of greatness, an era when engineering was the world's driving force, and this sense of achievement is replicated in our collection of traditional styled showers.
Premier Traditional Dual Exposed Thermostatic Shower Valve

Excellent flow rates - even at low pressure
Thermostatic Control with Anti-scald safety feature
Maximum temperature safety stop at 38°C with override button
Thermostatic control to +/- 2 to 3°C even if the water pressure fluctuates
The patented cartridge is highly resistant to calcium build up - even in hard water areas
In the event of hot or cold water failure the valve will shut down as per the relevant standard

A minimum operating pressure of 0.1 bar is recommended

Disclaimer - Not all products are shown in the lifestyle image provided

If you are looking for the ideal item to complement a traditional shower space then this Premier Traditional Dual Exposed Thermostatic Shower Valve is perfect. This designer shower valve features a cross head design temperature control which is typical of the period era and will match with a range of traditional taps for a coherent finish. From our deluxe Premier showers range this exposed valve also features a sleek lever handle to control the pressure of the water. The chrome finish will add a gleaming finish to any shower enclosure it is placed in. Premier offer a 10 year manufacturer's guarantee as standard which assures you of the durability of this stylish shower valve.


Finish Chrome
Guarantee 10 Year
Part Number A3091E
Barcode 5055146181538
Manufacturer Premier
Category Shower Valves
There are no reviews for this product, you can be the first to write a review by clicking the button below
Write a Review
No. of Questions  
Ask a question
What size are the inlet pipes please? I need 3/4"
Hello, They are 15mm, depending on your installation it is sometimes possible to reduce pipework to 15mm. A qualified plumber would be able to asses and advice on this. Hope this helps Ryan
  • Did you find this question helpful?  Yes   No