Stuart Turner 46387 Monsoon Extra Standard Single 1.4 Bar Pump
Click the 360° icon to rotate and zoom the pump
To compliment this pump we also sell popular additions which can be purchased from the Customers also bought section of this page.
Why fit a flange?
A flange reduces air being sucked into the pump which prolongs the life of your pump, and it can make installation much easier.
Why install the optional Pump Mat?
The addition of an anti-vibration mounting pad provides improved sound insulation further reducing the transfer of motor noise and vibration.
The Monsoon Extra 1.4 bar single pump is designed for use in larger domestic and light commercial applications. Installed into an open vented hot or cold water system, where all outlets are below the level of the cold water cistern, it has the equivalent effect of raising the cold water cistern 13 metres above its current position with a flow rate of 45 litres per minute.
Applications include boosting water pressures to individual outlets where a medium pressure is required. The pump is not recommended for use in pairs boosting common hot and cold supplies to mixer taps and shower valves.
A positive single pump can be used to:
*Boost the water pressure in either the hot or cold water supply pipe.
*Boost the blended water outlet between the shower valve and the shower rose.
22mm Push-In Flexible Connectors (2 Included)
Flow and pressure switch operation
Approximately 1.0 l/min Flow Switch Sensitivity
22mm Push-In Plumbing Connection
WRAS Approved Shower Pump
This shower pump has one incoming water supply ONLY. Please check that you require a single impeller positive head shower pump before placing your order.
Please Note: These pumps should not be used for Supply of hot and cold water services to a common mixer or Supply of pumped hot water service to a common mixer where the cold supply is mains fed.
Guarantee: This Stuart Turner monsoon extra pump is covered by a 3 Year Guarantee.