COVID-19 Notice: Operating Online as usual. Our trade counter is open but our showroom is closed.
677.61408
Stuart Turner 46606 CH 4-60 FL Multistage 6.0 Bar Pump with Automatic Flow Switch
To compliment this positive head pump we also sell popular additions which can be purchased from the Customers also bought section of this page.
The CH Automatic Flow Switch range of centrifugal multistage pumps offer a simple solution to pressure boosting where a gravity flow of approx. 1 l/min already exists.
Ideal for the pressurisation of water to outlets in a positive head application, where an instant boosted supply is required from a simple to install package. The range is suitable for commercial or domestic use, pumping hot or cold water.
Fully automatic control - positive head
Built in ‘no water’ cut out
No pulsing in operation
Easy installation
Quiet operation
Brass / stainless steel construction
Seal materials: EPDM / carbon / ceramic
G 1¼ F Inlet & G 1 F Outlet
To compliment this positive head pump we also sell popular additions which can be purchased from the Customers also bought section of this page.
Why fit a flange?
A flange reduces air being sucked into the pump which prolongs the life of your pump, and it can make installation much easier.
Why install the optional Pump Mat?
The addition of an anti-vibration mounting pad provides improved sound insulation further reducing the transfer of motor noise and vibration.
The CH Automatic Flow Switch range of centrifugal multistage pumps offer a simple solution to pressure boosting where a gravity flow of approx. 1 l/min already exists.
Ideal for the pressurisation of water to outlets in a positive head application, where an instant boosted supply is required from a simple to install package. The range is suitable for commercial or domestic use, pumping hot or cold water.
Fully automatic control - positive head
Built in ‘no water’ cut out
No pulsing in operation
Easy installation
Quiet operation
Brass / stainless steel construction
Seal materials: EPDM / carbon / ceramic
G 1¼ F Inlet & G 1 F Outlet
| Suitable for | Positive Head |
|---|---|
| Pressure | 6.0 Bar |
| Guarantee | 1 Year |
| Brand | Stuart Turner |
| Part Number | 46606 |
| Barcode | 5050400466062 |
| Delivery Zone | Small Delivery | Large Delivery |
|---|---|---|
| Zone 1 | £6.95 | £39.95 |
| Zone 2 | £6.95 | £59.95 |
| Zone 3 | £6.95 | £79.95 |
| Other | Requires Postcode | Requires Postcode |
Prices shown are the standard delivery charges for each zone, prices may vary depending on your full postcode. Please enter your full postcode at the checkout stage for an accurate delivery cost.
Stuart Side Entry Flange by Stuart Turner
£27.76
Was
£42.66
Stuart Turner Anti-Vibration Pump Mounting Pad
£42.87
Was
£44.40
Awaiting Delivery
Stuart Top Entry Flange by Stuart Turner
£28.63
Was
£40.25
