Aquadart Wetroom 8 Black Matrix

The ultimate in luxury and style, a wet room can completely transform a bathroom and gives it a real ‘wow’ factor. Wet rooms with their flawless aesthetics create a sense of spaciousness throughout and they are far easier to maintain than the usual standard shower enclosures.

This heavenly wet room package takes it even one step further, with its statement black frame and eye-catching grid detailing. Manufactured by Aquadart, the Wetroom 8 Black Matrix glass panel has been crafted to exacting high standards. It has a luxurious glass thickness of 8mm and it comes with a reassuring lifetime guarantee, affirming the superior quality and durability of it.

The black profile included allows for a generous adjustment for out of sync walls, while the black stainless steel support arm adds strength and rigidity. With a Clean & Clear protection system added to the glass, the wet room panel is thoroughly hygienic and resistant to both limescale and water spots. This high end luxury wet room panel looks fabulous when installed flush to the floor or if preferred, a shower tray can be added. We stock a wide range of luxury low profile slate shower trays that will perfectly complement.

Clear glass including black profile
Concealed fixings
Generous adjustment for out of true walls
8mm Toughened safety glass
2000mm Glass height
Each wetroom panel is supplied with a support arm and joining bracket
Clean & Clear™ glass protection system
Suitable for use with a shower tray or wetroom installation

Right hand flipper panel shown in photograph, pivots 123°
Optional floor chanel

Shower tray not included. View our entire range of shower trays available.

Adjustments (min - max):

700mm (675 - 690mm)
760mm (735 - 750mm)
800mm (775 - 790mm)
900mm (875 - 890mm)
1000mm (975 - 990mm)
1100mm (1075 - 1090mm)
1200mm (1175 - 1190mm)
1400mm (1375 - 1390mm)

---

Suitable Installations:

Alcove

Corner

Please note: The above diagrams are for illustration purposes only.

What is Clean & Clear™?

The Clean & Clear™ glass protection system creates a 'non-stick' surface on your shower enclosure that resists lime scale build-up along with water spots allowing your shower enclosure to maintain in pristine condition for longer. Whilst maintaining the look of your shower enclosure it also helps to protect against bacteria growth making your bathroom more hygienic.

Shower Enclosure Adjustment Ranges:

When viewing the shower door size or side panel size you will find they have an ‘adjustment range’. There is space within the wall profile where you can adjust the frame, either closer or further away from the wall. Usually, adjustment ranges only reduce the size of the enclosure, thus, the largest size of the adjustment range is the actual measurement of the door or side panel. Adjustment ranges can be used if you have an uncommon sized space for your enclosure, if you have uneven walls or you have a tiled enclosure space.

The below diagram shows the adjustment range within a tiled enclosure space.

Please Note;

Adjustment ranges WILL differ between manufactures and enclosure types.

Prices shown are the standard delivery charges for each zone, prices may vary depending on your full postcode. Please enter your full postcode at the checkout stage for an accurate delivery cost.